Ghost II Immobiliser
Guard your vehicle against key-cloning, hacking, and car theft. It operates silently and is unnoticeable to thieves because it doesn't use LED indications or key-fob tags to alert thieves that it's there.
Transport Mode can be temporarily disabled in certain situations such as vehicle transport or when your vehicle is being repaired.
Simple change of PIN code
Ghost is the next generation of security devices. It will secure your vehicle without cutting wires or adding an aftermarket immobiliser, or alarm key fobs. It is directly connected to the vehicle's CAN Data Network and a personalized PIN Code can be programmed into it using the factory buttons on the dash and steering wheel. This code will prevent the engine from starting and is not detected by any RF scanning technology or code-grabbing technology used today.
The system comes with an emergency pin code override, in the event that a user forgets their code or the programming key is lost. It also has the Service/Valet Mode, which allows the vehicle to be started temporarily and driven without the need for the use of a valid code. This makes it ideal for transportation or servicing.
The UK automotive aftermarket, though flourishing, isn't invincible to theft. The OBD port in your vehicle can be hacked by thieves in order to get around the traditional security measures like locking your steering wheel and wheels. This can be done using an laptop, USB cable and an inexpensive OBD scanner that can be purchased online under PS50.
In order to avoid theft, it is crucial to secure your vehicle by installing an immobiliser for ghost ii. ghost vehicle immobiliser 's a small device that can prevent theft of your vehicle. Once you have your PIN code it's simple to use. The device is housed inside a small box that can be connected to the wiring harness that is on your vehicle. It can be placed anywhere on your car and is weatherproof. This makes it difficult for thieves to locate. In addition to this, the device is easy to install and comes with a guarantee.
Small device that is weatherproof
The device is connected to the CAN data network in your vehicle without cutting cables and is quiet. The device can be programmed with a an unique PIN through the buttons on your dashboard and the steering wheel. This can prevent theft. The device has an GPS tracker built-in. Several insurance companies for cars recommend it. It is activated through an app on your smartphone. It is weatherproof, and can be hidden inside the car so that it is nearly impossible for thieves.
Ghost II is completely silent, unlike traditional systems that are heard by criminals. It requires between 4 and 21 button presses on the buttons of the vehicle. The sequence can be determined by the owner of the vehicle according to their preferences and the sequence can't be broken. There is a mobile app that can be used to disable the system. If you are selling your vehicle, there is also a master reset code that can reset the immobiliser's CAN bus.
Modern thieves can make use of diagnostics to detect circuit breakages on modern cars, but the Ghost is not equipped with circuit cuts. Our team of CANbus fitters can install this system into an automobile with confidence.
Unlike other CANbus immobilisers, which require key fobs and a key fob, the Ghost is compatible with all types of vehicles. The technology is so advanced, it can protect from various security threats like signal relay attacks as well as ECU switching. It works with a variety of smartphones and can send warnings to owners in the event that their vehicle is being driven without authorization.
Each vehicle is tested
Ghost is an ingenious immobiliser system that shields your vehicle from key cloning, hacking and even key theft like nothing else on the market today. To steal a vehicle that is protected by Ghost the thief must physically remove the device and then take it to the trailer. It also protects against the use of wheel locks, jumper cables and universal keys.
This system is incredibly simple to set up and runs without a sound. It connects to your vehicle's CAN data circuit which allows it to communicate directly with your ECU (Engine Control Unit). It is completely sealed and small that it can be wrapped inside your vehicle harness and placed anywhere, making it nearly impossible for thieves to spot.
Once installed, it blocks the vehicle from starting until the specific sequence of disarming is activated using the buttons on your vehicles steering wheel, door panels or center console. It can be set up to 20 numbers long and allows you to choose the level of security you wish to be. It can also be used to activate a Service/Valet mode which lets you temporarily start and drive your vehicle without entering your PIN code.
It uses it's CAN data circuit, which means that there are no radio frequencies, like the traditional immobiliser. This means a thief cannot listen to the relay and try to decipher the PIN code being entered. Also, it doesn't have circuit cuts and can't be identified by diagnostic tools or code-grabbing technology or RF scanning.
At Boundary Car Care we have been incredibly proud to be certified installers of this amazing product for quite some time now and are hugely amazed by how well it performs and the peace of mind it gives our customers. It is a great way to protect your pride and happiness during these tough times.
Emergency Pin Code Override
The Ghost immobiliser is a tamper-proof and weatherproof device that stops your vehicle from starting without the correct PIN code entered. It is discreetly hidden in your vehicle's wiring harness. It makes use of buttons on the dashboard or steering wheel to generate a unique code sequence. It is not a Thatcham device, since it does not have LED indicators and is connected to your vehicle via the CAN system. This makes it impossible to track by professional thieves who are able to detect alarm/immobiliser systems in modern vehicles by using readily available diagnostic tools.
If you'd like to temporarily disable the Ghost immobiliser, it can be activated by entering an emergency code to override the app on your smartphone. This lets you loan your car to a family member, friend or valet, without sharing your pin. It's ideal for situations like maintenance or when you have to leave your car at a garage or valet.
Ghost can be used in conjunction with the driver fob. This gives you the option to start your car using your key or with the app. This is a great option for when you want to hand your child the keys to the car or if you can't enter the pin number in a hurry.
With a simple PIN change process, user-friendly interface, and multiple security features, there's no wonder that the Ghost immobiliser is recommended by a range of insurers and is supported by a security assurance. Its sleek slim design and seamless integration with the vehicle's existing systems make it an indispensable accessory to any performance or classic car.
Service/Valet mode
The Ghost is an immobiliser that prevents theft of vehicles by blocking communication between your key and the ECU which means that the engine can't be started without entering a unique PIN code. It's also hidden within the wiring allowing it go unnoticed and it doesn't have LED indicators that could indicate its presence. This is great when you're looking to hand over your car to a mechanic or valet parking. To activate valet mode simply enter the code that was provided to you by your engineer at the completion of installation - it will allow the car to start without having to go through the sequence to disarm. To leave valet, return your car to normal operation. The code will be changed automatically to your normal pin.
In contrast to other security devices that rely on the vehicles keys or buttons, Ghost is designed to integrate into your car's CAN bus system. This provides unrivaled protection against modern theft methods like key cloning or hacking.
Once installed, your engineer will show you how to arm, disarm and valet-mode your vehicle. All of this is done via your smartphone app. Your engineer will create your pin, which is easy to remember and mathematically impossible for thieves to guess. However, should you forget it, do not worry as every installation includes an Emergency PIN Code override that allows you to get your vehicle back in action.
Our installers are fully qualified and have been trained to ensure that your Ghost is installed correctly. All of our installations are done on the customers premises and we give a brief explanation on how to operate the device and mobile app. After your Ghost has been installed we ensure its functionality for life.