Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's discreet, does not use LED indicators or key fobs and is concealed in the wiring of your vehicle.
It also permits the user to disable the system temporarily through Transport Mode to use it when they are renting their vehicle. This guide will take you through the steps of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key cloning attacks, hacking attacks and relay attacks. The system connects directly to your vehicle's ECU and is protected by a unique PIN code that you choose. It's inaccessible to thieves using diagnostic scanners or other advanced methods, and it is unable to be disabled by circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a clean connection with the ECU of your vehicle. A certified installer from Thatcham can assist in the installation and programming of your Ghost system. They can also suggest a tracking system or alarm to complement the protection package for your vehicle.
To avoid the accidental deployment of airbags or short circuits, the installer must first remove your battery. After the battery has been disconnected, the installer can be able to work safely. Basic hand tools can be used to ensure precise connections. A multimeter is a great tool to check electrical values. Insulation tape and cable tie are crucial to ensure connections are secure and ensure that wiring is neat. Lastly, the user manual provides specific guidance specifically tailored to your Ghost Immobiliser model.
It is crucial to select an area for grounding that is free of dirt or paint during installation. The installer should also make sure the immobiliser's CAN H as well as CAN L wires are connected to the appropriate ports on your vehicle's ECU. These wires can be plugged into or soldered, depending on the model. To ensure a secure and durable connection it is recommended that you choose a high-quality plug.
Transport Mode can be activated by the customer once the installation is completed. This permits mechanics or valet parking to access the vehicle without knowing the pin code. The user must press the icon for service on the dashboard five times in 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a smart option for those who regularly rents their vehicle on platforms like Turo. Having an immobiliser can also lower insurance costs, as it greatly reduces the chance of theft.
Getting Started
It's not difficult to come up with an autowatch immobiliser in order to guard your car from thieves. It will stop your car from being started even when a criminal steals or copies the key. It's possible due to its advanced technology, which prevents the engine from starting until the correct PIN code is entered.
The device is connected to the vehicle's bus system CAN and allows direct communication with the ECU. It uses the buttons on your dashboard and steering to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your vehicle. This is the best security system to protect your pride and joy, keeping its value intact in the event that you decide to sell it in the future.
Installing a ghost ignition is an easy process, however, it is crucial to follow the directions carefully to avoid problems with the electrical system and malfunctions. First, how much is a ghost immobiliser need to locate and determine a constant 12V power source as well as an appropriate grounding point on the vehicle's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Use high-quality connectors and soldering methods to create a secure connection. Connect the connections with heat shrink tubing, insulation tape or other materials to prevent short circuits in electrical power.
After the wires are connected, you can plug in the battery and begin the engine to check whether the immobiliser is functioning. After you've verified that everything is working properly then you can put the immobiliser in a secure location in the vehicle. Make sure you hide it well to prevent thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it is in compliance with the highest standards of security and is a great protection against car thieves. It is impervious to hacking and key cloning and cannot be disabled without the code. The device is also easy to use and is able to be put into an auto valet mode so that your car will not be activated when you take it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to deter theft of vehicles. It connects directly to your vehicle's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable to your vehicle. The Ghost Immobiliser will not interfere with the factory settings of your vehicle, unlike other aftermarket systems which require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanners. The system does not send or receive radio frequency signals and instead uses CAN data to communication with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
Enter your disarm sequence (either two or one buttons) and then switch on the ignition of your car to activate Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. Once you've verified this, you're able to start your vehicle and leave with peace of mind.
Once installed Once installed, the Ghost Immobiliser will safeguard your vehicle from hacking and key cloning while preserving the value of your car's pride and joy. If you ever have to hand over your vehicle to a valet or service provider The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll require a constant power source (12V) and a grounding point to complete the installation of a Ghost immobiliser. Be sure that they are well-insulated and safe to touch. Cable ties are also recommended for bundling and secure the wires. This will reduce the possibility of theft by thieves. To avoid making mistakes, make sure to double-check these points and mark them using labels or tape. Verify all connections for signs that they're getting worn out. Connectors that are loose could cause system malfunctions, so be sure that they're firmly in place and properly insulated. Don't forget to test your Ghost Immobiliser after installation has been completed. This will confirm that the unit functions properly and that all connections and insulation are secure. Be sure to correct any problems immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your car's ECU to stop unauthorised motor starting. Its cutting-edge technology protects your vehicle from hacking and key cloning and other methods employed by thieves to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to offer the ultimate security for your car. The Ghost's unique features and subtle design make it a preferred choice for car enthusiasts and security-conscious drivers alike.
It is crucial to follow the steps of installation to ensure a correct integration of the Ghost Immobiliser. Refer to the wiring diagram of the vehicle as it will assist you in locating and connecting the wires. You'll then need to identify the power and grounding sources. Once you've located them, you will have to mark them to make them easy to locate when installing. It is also important to use top-quality tools and materials. Basic hand tools can assist with making precise connections while a multimeter can check electrical values and ensure security. Cable tie and insulation tape ensure that all connections are neat. A Ghost-specific user's guide is also available.
It is important to test the system prior to installing it. Enter the PIN code into the system and start the vehicle. This will ensure that the immobiliser is working as it should and prevent unauthorised vehicle starts. This step should be done regularly as part your regular inspections of your vehicle to ensure that the system is always working correctly.
After the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will keep your car and its contents secure from thieves who might steal it and ensure that nobody is able to take off with your vehicle without the proper PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts to steal or tamper with. This lets you locate your car if it's stolen.
The Ghost can be used on a wide range of vehicles and is compatible with all major manufacturers. If you are interested in protecting your car using this advanced device, call Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA registered installer, which ensures that we adhere to strict standards for the installation of our products. This assures customers, insurance companies, and law enforcement that all installations are completed safely and in a correct manner.